®FloriFluid
antifreeze solution for sprinkler systems

®FloriFluid is a red coloured, clear and almost odourless liquid based on 1,2 propylene glycol for use in sprinkler systems with anti-corrosion additives to protect the materials used in plant construction and is supplied ready for use.

GET CONSULTATION NOW

®FloriFluid
antifreeze solution for sprinkler systems

®FloriFluid is a red coloured, clear and almost odourless liquid based on 1,2 propylene glycol for use in sprinkler systems with anti-corrosion additives to protect the materials used in plant construction and is supplied ready for use.

GET CONSULTATION NOW

    ®FloriFluid

    Antifreeze solution for sprinkler systems down to -19.7°C. Approved fire extinguishing agent for sprinkler systems.

    ®FloriFluid is a red colored, clear and almost odorless liquid based on 1,2 propylene glycol for use in sprinkler systems with corrosion protection additives. ®FloriFluid is supplied ready to fill with a frost resistance of -19.7 °C.

    ®FloriFluid is used in sprinkler systems in accordance with VdS CEA 4001 within the frost-endangered areas behind the corresponding wet alarm valve stations. The corrosion protection additives provide permanent and reliable protection against corrosion for the materials normally used in system construction and approved by us.
    For VdS systems, it must be proven that pure water emerges from the hydraulically most unfavorable sprinkler after 4 minutes.

    DOWNLOAD DATA-SHEET

    Our services

    We offer a range of free services for our customers! Got questions? Schedule a face-to-face at our office or on-site.

    View our services

    Product data sheets

    All technical product data sheets as well as the current safety data sheets for FloraFluid can be found in our download area.

    Data sheets download

    Frequently Asked Questions
    about Florifluid

    ®FloriFluid is a red coloured, clear and almost odourless liquid based on 1,2 propylene glycol for use in sprinkler systems with anti-corrosion additives to protect the materials used in plant construction and is supplied ready for use. ®FloriFluid contains no amine, borate, phosphate, nitrite or silicate. The product contains no CMR substances (carcinogenic, mutagenic, reprotoxic) and no substances specified in the RoHS Directive.

    ®FloriFluid must be tested for frost resistance and segregation at regular intervals by our service laboratory in accordance with VdS CEA 4001. The analysis report contains an assessment and suggestions that must be followed. Otherwise our warranty will be cancelled. Please send the sample to our service laboratory at our company address and be sure to enclose a completed system registration form. This can be found on page 4 of this manual and at www.florifluid.de.

    These reports must be kept together with the system documentation. If antifreeze is lost, only ®FloriFluid must be refilled. Otherwise, considerable malfunctions may occur. When used in VdS systems, the product is no longer a recognised component. All components must be selected and installed in accordance with the relevant VdS guidelines.

    ®FloriFluid must not be mixed with water or other antifreeze agents. The system must be closed to prevent the ingress of atmospheric oxygen. Soldered connections must be made with silver or copper brazing alloy. All flexible connections must be made with metal hoses.

    As contamination in the system cannot be ruled out when installing the sprinkler system (metal shavings, scaling, flux, etc.), sufficient flushing must be carried out before filling with ®FloriFluid. Filling with ®FloriFluid must be carried out in such a way that no air or gas pockets form in the system. Sufficient venting of the system must be ensured.

    ®FloriFluid is used in sprinkler systems in accordance with VdS CEA 4001 within the frost-endangered areas downstream of the corresponding wet alarm valve stations.

    For VdS systems, it must be proven that pure water emerges from the hydraulically least favourable sprinkler after 4 minutes. Care must be taken to ensure that no unauthorised pressures arise within the system due to temperature fluctuations.

    The inhibitor system reliably protects all commonly used metallic materials against corrosion and deposits. Galvanised components must not be used. If Teflon sealing tape (PTFE) is used, leaks may occur due to the lower surface tension.

    All components that come into contact with ®FloriFluid must be resistant to glycol!

    The ®FLORIFLUID System

    NOTES

    BEFORE TOPPING UP

    ®FloriFluid must not be mixed with water or other antifreeze agents. The system must be closed to prevent the ingress of atmospheric oxygen.
    As contamination in the system cannot be ruled out when installing the sprinkler system, the system must be flushed sufficiently before filling with ®FloriFluid.

    IMPORTANT

    FOR COMMISSIONING

    ®FloriFluid is used as a frost and corrosion protection agent for sprinkler systems in frost-prone areas.  ®FloriFluid is a red, ready-to-use mixture based on 1.2 propylene glycol, corrosion protection additives and deionized water, adjusted to a frost resistance of -19.7°C ready for filling.
    ®FloriFluid does not segregate even after a long standing time.

    WARRANTY

    2 YEARS

    The manufacturer's warranty for ®FloriFluid is 2 years. According to VdS specifications, ®FloriFluid must be tested at regular intervals by our service laboratory for frost resistance and segregation in accordance with VdS CEA 4001. Improper handling of the product will invalidate the warranty. If the antifreeze is lost, only ®FloriFluid must be refilled.

    We are happy to advise you individually and on site

    We offer you an uncomplicated enquiry option, as well as all product and safety data for our products.

    GET CONSULTATION NOW

    Specialist for
    frost protection solution for sprinkler systems

    DELIVERY PROGRAM

    includes innovative, environmentally friendly products with good heat transfer properties and frost and corrosion protection properties with optimum flow behaviour, especially for the food market.

    OUR KEYNOTE / GUIDING THEME

    to offer heat transfer fluids and special products, which meet all requirements of our customers, by means of speed and appropriate product diversity.

    Our consistently high quality

    is subject to constant monitoring. Quality assurance based on DIN ISO 9001 guarantees consistently good quality with constant quality control.

    Wärmeträger-Partner Carlsberg
    Wärmeträger-Partner Haribo
    Wärmeträger-Partner Enercon
    Wärmeträger-Partner Henkel
    Wärmeträger-Partner Evonik
    Wärmeträger-Partner_10
    Wärmeträger-Partner_11
    Wärmeträger-Partner_12
    Wärmeträger-Partner_13
    Wärmeträger-Partner_14
    Wärmeträger-Partner_15
    Wärmeträger-Partner_16
    Wärmeträger-Partner_17
    Wärmeträger-Partner_18
    Wärmeträger-Partner_19
    Wärmeträger-Partner_20
    Wärmeträger-Partner_21
    Wärmeträger-Partner_22
    Wärmeträger-Partner_24
    Wärmeträger-Partner_23
    Wärmeträger-Partner_26
    Wärmeträger-Partner_25
    Wärmeträger-Partner_27
    Wärmeträger-Partner_28
    Wärmeträger-Partner 6
    Wärmeträger-Partner_7
    Wärmeträger-Partner_8
    Wärmeträger-Partner_9

    Sustainability

    In addition to the technical requirements for the cooling brines, the ecological aspects are never disregarded.

    The products are produced exclusively with environmentally friendly raw materials. The production facility at the Düren plant is optimised to conserve resources and is powered entirely by solar power from its own photovoltaic system.

    Der-Grüne-Punkt-Pro_Kühlsole_GmbHKlima_Protect_Pro_Kühlsole_GmbH